<h1>Easy Steps to Mount TV on Drywall Without Studs</h1>

Mounting your TV on the wall is a great way to save space and get a clean, modern look in your living room or bedroom. But if your walls are drywall without wood studs, securely mounting your TV can seem tricky. Don’t worry – with the right tools and some easy steps, mounting a TV to drywall without studs is a simple DIY project anyone can do!

<h2>What You’ll Need</h2>

• Drywall anchors orToggle bolts rated for your TV’s weight
• Stud finder
• Drill
• Drill bits (7/32″ for anchors, 1/2″ for toggle bolts)
• Screwdriver
• Level
• Friend to help (optional but recommended)

<h3>Step 1: Find a Spot & Use a Stud Finder</h3>

First, decide on an area where you want to mount the TV on the drywall. Use a stud finder to check if there are any studs in that area. Studs provide the best mounting support, so use them if possible. But if not, no problem! You can still securely mount to just the drywall.

<h3>Step 2: Mark Holes for Mounting Bracket</h3>

Next, use your TV’s mounting bracket as a template to mark where you’ll drill holes on the wall. Make sure to use a level to keep the bracket placement straight.

<h3>Step 3: Drill Holes for Drywall Anchors/Toggles</h3>

For drywall anchors, drill holes using a 7/32″ drill bit where you marked. The anchors will fold out once inserted, gripping the drywall. For toggle bolts, use a 1/2″ bit to allow the bolt’s wings to pass through.

<h3>Step 4: Insert Anchors & Hang Mounting Bracket</h3>

Push drywall anchors into the holes, then use a screwdriver to insert the mounting bracket screws into the anchors. For toggle bolts, flip the wings after insertion, then tighten the bolts to secure the bracket.

<h3>Step 5: Mount Your TV and Enjoy!</h3>

With the mounting bracket secure, simply hang your TV following the bracket instructions. Add cables, streaming devices, and you’re set for an awesome viewing experience!

Following these simple steps, you can easily mount a TV weighing up to 100 lbs on drywall without studs. Just use the right drywall anchors and go slowly and safely. Happy viewing!

You scored an amazing deal on a massive new 75-inch QLED TV. Now you need to get it securely mounted on your living room wall. Could hiring a local handyman get the job done on the cheap? Or should you hire a local business that specializes in such handyman services?

While cost-effective, using a general handyman for TV mounting does come with some caveats. In this guide, we’ll break down when it makes sense to hire a handyman versus a specialized TV mount pro.

Handyman TV Mounting Costs

The first appeal of using a handyman service for your TV installation is the lower cost compared to dedicated TV mounting companies. Here are typical handyman rates:

• Hourly Rate – $40-$70 per hour. Simple mountings may only take 1-2 hours. Complex jobs could run 4+ hours.
• Day/Half Day Rate – Handymen may charge a flat half day or full day rate of $200-$400 rather than hourly.
• Flat Rate Per Job – Some handymen quote a flat rate of $100-$300 to mount a single TV based on job scope.
• Material Costs – You may need to cover the cost of any mounting equipment or hardware.
• Travel Fees – If located far, handymen may charge drive time and mileage fees.

While handyman rates are generally 50-75% cheaper than dedicated TV mounting services, keep reading to learn about some key considerations with this budget route.

Handyman TV Mounting Pros

There are some advantages to hiring your neighborhood handyman for TV mounting:

Cost – As discussed above, handyman rates are often much cheaper, especially for simpler jobs.

Availability – With fewer specialist certifications, handymen tend to have more availability on short notice.

Familiarity – An established local handyman has likely been inside your home before and understands the layout.

Relationships – Developing a relationship with a go-to handyman can be useful for quick periodic jobs.

So when budget is the priority and the mounting is relatively straightforward, a competent handyman can potentially get the TV on the wall satisfactorily.

Handyman TV Mounting Cons

However, there are also some potential downsides to consider with handyman TV mounting:

Lack of Specialized Training – TV mounting best practices evolve rapidly. Handymen often don’t have up-to-date specialized skills and knowledge.

Inability to Address Complex Issues – Handymen may not be equipped to handle challenges like routing cables, fish tapes, finding studs, etc.

No Advanced Tools or Equipment – Handymen won’t have commercial grade mounting gear, lifts, cable kits, AV calibration tools, etc.

No Insurance or Licenses – Unlicensed handymen don’t carry general liability insurance or bonding. This leaves you exposed in case of damages.

No Formal Warranties – Any workmanship guarantees are informal. Licensed pros stand behind their work.

Potential Hacks – Some handymen unfortunately cut corners to save time and effort. This can compromise safety and longevity.

These factors are why we recommend considering handyman mounting for smaller, basic TV installs only. Otherwise, a full-service professional is worth the added cost.

TV Mounting Jobs Best Suited for Handymen

When does it make the most sense to hire a lower cost handyman for TV mounting work? Here are the ideal scenarios:

• Small TVs Under 40 Inches – Lightweight sets with basic mounting needs.
• Basic Fixed Mounting – Non-articulating mounts requiring only simple stud mounting.
• Apartment or Dorm Installs – Short term mountings where longevity and cables don’t matter.
• Previous Successful Mounts – If they’ve mounted TVs for you properly before.
• Present Homeowners – Have an established relationship and are comfortable giving feedback.

But for any large, heavy, or complex TV mounting job, we always recommend paying for the additional expertise, equipment, and service guarantees of a professional TV mounting company.

Key Handyman Vetting Questions

If hiring a handyman for your TV mount, be sure to ask:

• How many TV mountings have you done?
• What type of mounting equipment do you use?
• Do you have references from recent TV mounting clients?
• What mounting techniques do you use to find studs?
• How do you determine ideal mounting height and location?
• How do you handle wiring and cable management?
• Do you offer any formal guarantee on your work?

This helps determine if they have suitable TV mounting experience and use proper methods.

Hire Certified Pro TV Mounters Instead!

While handymen serve a purpose on small jobs, for critical TV mounting work, we always recommend hiring insured, licensed, certified professional TV mounting services like our own.

You’ll benefit from:

• Thousands of TV mounting installs
• Lifetime guarantee on all work
• Late model commercial mounting equipment
• Finding all studs and optimizing placement
• Concealing & organizing all cabling
• Perfectly leveling & securing your TV
• Careful calibration and connections
• And much more!

For TV mounting you can trust both immediately and years down the road, contact our pros today for a free quote!

So you scored an amazing deal on a nice TV wall mount online, but realized once it arrived that it didn’t include the TV mounting bracket. No worries – can’t you use any universal TV bracket and just bolt it onto the mount?

Generally speaking, yes – many TV mounting brackets are designed to be somewhat universal and interchangeable. However, there are a few compatibility considerations to ensure you select the optimal bracket for your specific television and mount.

In this guide, we’ll overview when universal TV mounting brackets work fine versus when you should choose a mount-specific and TV-specific bracket for maximum safety and stability.

TV Bracket Basics

Before diving into universality, let’s quickly cover the key pieces that make up a wall mount bracket system:

Mount – The main arms,joints and plates that physically attach to the wall and support the TV bracket and TV.

TV Bracket – Also called a TV interface. The plate that screws into the back of your TV and then attaches onto the mount.

VE SA Interface – The standard screw hole pattern on the back of flat screen TVs that brackets are designed to fit.

As long as the TV bracket properly fits both the mount and the VESA pattern on your TV, it can work across various brands and models. But there are still some ideal matching considerations we’ll now dive into.

When Universal TV Brackets Work

Here are some instances where a generic, non-TV brand specific bracket should perform just fine:

Small to Mid-Size TVs – For TVs 42″ or smaller, just about any quality bracket matched to your VESA sizing will mount securely.

Lightweight TVs – Similarly, lighter flat screens under 50lbs don’t require as beefy and specialized brackets to support them. Basic but sturdy brackets tend to work across models.

Basic Mounts – Using a fixed, non-articulating basic mount? Universal brackets line up just fine. More complex mounts require careful bracket pairing.

Matching Screw Sizes – As long as the bracket uses the same bolt size and spacing as your TV’s VESA pattern, fitment shouldn’t be an issue.

So in those simple scenarios where you don’t need high articulation or heavy weight support, a generic well-built bracket should perform admirably.

When to Choose a TV-Specific Bracket

Here are some instances where choosing a bracket designed specifically for your television model or brand is recommended:

Large/Heavy TVs – For TVs 55″ and above or over 60lbs, match the bracket strength and design to the specific display.

Articulating Mounts – Choosing a bracket made for your TV ensures ideal range of motion and viewing angles.

Odd VESA Patterns – Many TVs deviate from standard VESA spacing, requiring brackets designed for that specific hole pattern.

Thin TV Profiles – Low profile brackets that hug ultra thin screens like OLEDs maintain the slim aesthetic.

Curved TVs – Specialized brackets properly cradle and hold curved screens while clearing connections.

So for larger or uniquely designed TVs, take time to find an ideally matched TV bracket specific to the make and model for the safest mounting outcome.

Top TV Bracket Manufacturers

Now that we’ve covered proper TV bracket selection, let’s overview some of the top brands making quality universal and TV-specific brackets and plates:

Sanus – Known for sleek, low-profile brackets, like their Ultra Thin series for tight wall-hugging fits.

Peerless – Peerless makes rock-solid brackets including SmartMount series designed for specific TV models.

Milestone – Milestone’s AVF brackets provide articulation while supporting large display weights.

Monoprice – Budget-friendly Monoprice brackets still offer great build quality and VESA compliance.

Perlesmith – Perlesmith makes affordable, fully universal mounting plates supporting 400×400 and larger VESA.

ECHOGEAR – ECHOGEAR designs super slim profile brackets with easy tilt and leveling capabilities.

This covers some of the major universal and TV-specific bracket options to safely mount your television.

Let the Pros Handle It!

While universal brackets serve most smaller TV mounting needs, we always recommend having professional installers select and install the ideal bracket for your television and desired mounting system.

Benefits of pro installation include:

• Measuring your TV and mount points to select optimal brackets
• Considering viewing angles, room layout, and usage
• Properly securing bracket hardware to manufacturer specs
• Perfectly leveling and orienting your TV
• Neatly organizing cables and wires in the wall

For the peace of mind of a secure TV designed to last, contact our professional TV mounting company today to discuss brackets and get a free quote!

Did you purchase a new Samsung TV and are now looking for the perfect mount? Samsung’s sleek, ultra thin QLED and Frame TVs demand specialized mounting brackets to hold them securely while preserving a low profile.

In this guide, we’ve researched the top 8 Samsung TV mounting brackets across various price points and mounting needs. We break down what makes each bracket ideal for Samsung’s latest models.

Why a Samsung-Specific Mount?

While many universal TV mounts would physically work, mounts designed for Samsung TVs feature a few important benefits:

Thinner Profiles – Brackets hug tight to the TV and wall for that sharp, floating look.

Specialized Brackets – Samsung TVs use custom mounting hole patterns that typical mounts don’t accommodate.

VESA Specs – Samsung uses unique VESA sizes like 400×400. Samsung mounts conform specifically.

Weight Ratings – Designed max weight capacities ideal for lighter Samsung TV models.

Cable Management – Samsung mounts intelligently route cables to maintain a clean, wire-free aesthetic.

With those benefits in mind, let’s count down the top wall brackets and mounts for your new Samsung television.

1. Samsung Slim Fit Wall Mount

Our top overall pick is Samsung’s own Slim Fit Wall Mount designed specifically for 2018 and newer Samsung TVs.

Key Features:

• Super slim 0.6″ profile hugs the wall
• Designed for Samsung’s unique hole patterns
• Includes multi-directional leveling after mounting
• Supports up to 80 lb TVs
• VESA compliant (200×200 to 400×400)

We recommend the Slim Fit Mount for Samsung QLED and Frame TVs up to 65″. It’s by far the slimmest option that seamlessly blends with the TV.

2. MantelMount MM340

For above-fireplace mounting, the MantelMount MM340 is engineered specifically to fit Samsung TVs while allowing you to lower and raise the TV.

Key Perks:

• Designed for Samsung VESA patterns
• Lowers TV 18″ with the touch of a button
• Safely raises TV when not in use
• Holds TVs up to 65″ and 100 lbs
• Can be painted to match décor

This mount makes it easy to get the perfect fireplace TV positioning without neck strain.

3. Peerless Samsung SR560

Peerless makes some of the sturdiest mounts around, and the SR650 is optimized for 2018 and newer Samsung TVs.

Noteworthy Features:

• Fits Samsung hole patterns up to 800×600
• Super low 0.47″ profile
• Articulates for swivel, tilt, and extension
• Supports up to 125 lb TVs
• Comes in white or black

We like the SR650 for larger Samsung TVs needing flexible positioning. The articulating arms provide tons of viewing flexibility.

4. Sanus Tilt Premium TLT6

The Sanus TLT6 Tilt Premium mount provides an ultra clean look perfect for Samsung TVs.

Key Attributes:

• Super slim 0.59″ profile
• Custom bracket for Samsung hole patterns
• Smooth one-touch tilt for angle adjustment
• Holds up to 60 lb TVs
• Includes all mounting hardware

For bedroom TVs or smaller sets, the TLT6 offers easy tilt functionality in a tiny package.

5. Mount-It! MI-2061L

With robust steel construction, the MI-2061L securely supports your Samsung TV while remaining affordable.

Notable Stats:

• Made of heavy-duty welded steel
• Fits Samsung VESA mounts up to 600×400
• Tilts TV up to 15° down and 5° up
• Supports up to 88 lb TVs
• Ships fully assembled for quick install

This sturdy bracket is excellent for tenant or dorm installations where rock-solid performance is key.

6. ECHOGEAR Full Motion Articulating Bracket

ECHOGEAR’s articulating mount provides the greatest range of motion for adjusting Samsung TV viewing angles.

Key Specifications:

• Smooth tilt, swivel, and extension
• Specifically designed for Samsung VESA patterns
• Profile depth of just 2.6″
• Supports TVs up to 132 pounds
• Comes with lifetime warranty

We love the range of motion for fine tuning large Samsung TV positions in family rooms and living spaces.

7. Perlesmith Universal TV Stand

If you prefer resting your Samsung TV on a surface vs. wall mounting, Perlesmith’s Universal Stand is a sleek option.

Key Benefits:

• Accommodates virtually any TV stand hole pattern
• Scratch resistant tempered glass base
• Cable management for clean look
• Solid steel legs hold TVs up to 132 lbs
• Available in black, silver, or bamboo

This stand looks great in bedrooms, dorms, and offices holding smaller Samsung TVs.

8. Wali TV Wall Mount Bracket

For an ultra affordable Samsung mounting option, Wali’s adjustable tilt TV bracket offers great basic functionality.

Notable Features:

• Tilts TV up or down for better viewing angles
• Fits Samsung VESA sizes up to 400×400
• Low 2.4″ profile when mounted
• Holds TVs up to 88 lbs
• Includes bubble level and mounting template

On a budget? This gets the job done for smaller Samsung TVs without breaking the bank.

Get Your Samsung TV Mounted Right

While these Samsung brackets provide a great starting point, we always recommend having a professional installer assess your setup and select the optimal mounting system.

Our team handles complete Samsung TV mounting including:

• Selecting the right mount for your TV, wall, and viewing needs
• Precisely measuring and marking stud locations
• Leveling and securing the mount
• Securing cables and wiring inside the wall
• Safely lifting and mounting the TV
• Completing post-install calibration and adjustments

For the peace of mind of a secure, perfectly positioned Samsung TV installation, contact our pros today for a free quote!

So you ordered a fancy articulating TV wall mount online and it showed up with no screws included. No problem – can’t you just use any common screws from the hardware store to assemble and mount it?

We generally advise against using random generic screws for TV mounts. While many mounting screws are somewhat universal, there are important nuances in selecting the proper screws for maximum safety and security.

In this guide, we’ll overview when standard screws can work for TV mounts and when you should opt for specialized mounting hardware.

Why Random Screws Aren’t Recommended

While that bag of assorted wood screws in your toolbox may seem tempting, there are a few reasons why screw selection for your TV mount matters:

Strength – Not all screws are made equal. Weak ones could snap under the load of a heavy TV causing it to rip out of the wall.

Fit – Generic screw lengths and diameters may not fit the mount and wall correctly, leading to instability.

Appearance – Mismatched screws can detract from the clean look of a wall-mounted TV installation.

Corrosion – Low quality screws can corrode over time leading to loosening and failure.

So while you may be able to force generic screws to work, taking time to select the optimal fasteners ensures a safer and better looking installation.

When are Mounting Screws Interchangeable?

While we recommend using the hardware included with your TV mount kit, in certain cases, universal screws can substitute just fine:

• Assembling mount components together
• Attaching mount arms to the TV bracket
• Mounting small or light TVs

For these applications, general screws in the right lengths and threads can securely fit the bill in most cases.

However, when it comes to actually fastening the mount to the wall itself, specialized mounting screws are highly recommended. Let’s look closer at wall fastener options.

Screw Types for Wall Mounting

Here are the common screw varieties used to anchor flat screen TV mounts to various wall materials:

Lag Screws – Threaded wood screws that twist deeply into studs. Ideal for mounting to wooden stud walls.

Concrete Screws – Hardened steel drill tips that bore into concrete and masonry materials. Used for concrete, brick, and stone walls.

Drywall Screws – Special fine threads grip onto drywall without tearing the paper face. Help secure mounts to hollow drywall.

Toggle Bolts – Spring-loaded toggles compress to fit through holes then expand on the other side to grip tightly. Often used on drywall.

Now that we’ve covered the main screw and anchor types, let’s look at some best practices for selecting TV mounting hardware.

Match Screw Size to Mount and TV

One universal rule – always follow the manufacturer’s instructions for your specific TV mount model. The manual or product page will specify:

• Recommended screw sizes and types
• Ideal screw placement and spacing
• Required pilot hole sizing if pre-drilling

This ensures you use the proper screws anticipated for the mount’s load capacity and design.

As a general guideline for wall mounting:

• Small TVs up to 40” use M4, M5 or #8 screws
• Medium TVs 40”-55” use M6, M8 or #10 screws
• Large TVs 60”+ use M8, M10 or 3/8” screws or lags

Use larger diameter screws for heavier TVs and fully loading the mount’s articulation arms.

Use Proper Wall Anchors

While screwing directly into studs is ideal, using anchors in drywall and masonry is often necessary.

For drywall, specialized hollow wall anchors like toggle bolts grip better than standard screws. For concrete and brick, concrete screw anchors prove most secure.

Using suitable anchors for the wall material also allows you to use the optimal screw size to fill the anchor properly for maximum holding strength.

Use Stainless Steel or Coated Hardware

Look for high quality stainless steel or coated screws and bolts for TV mounting. They resist rust and corrosion far better than cheap hardware grade fasteners. This maintains integrity over the long term.

Stainless lags, concrete bolts, and toggle anchors are ideal investments for securely mounting your valuable TV for years to come.

Let the Pros Handle It!

While we hope these TV mounting screw tips help guide your project, you may wish to leave it to experienced pros. Our fully licensed installers have mounted thousands of TVs and can select and install the optimal hardware for your setup.

Other benefits of a pro TV mount include:

• Perfectly positioning the mount on the wall
• Concealing & organizing cables for clean install
• Precisely leveling your TV
• Tuning settings and connecting devices
• Lifetime support on all our work

For the ultimate peace of mind, contact our professional TV mounting service today for a free estimate!

So you picked out the perfect spot on your wall to mount your shiny new flat screen TV. Now comes the critical decision – what size bolts do you need to securely hang the TV mount? Choosing the wrong bolts can lead to a wobbly mount or even catastrophic failure.

In this comprehensive guide, we’ll cover everything you need to know about selecting the proper mounting bolt size and type for your television.

Why Proper Bolt Size Matters

You may be tempted to just grab any standard bolts from the hardware store for your TV installation. However, using the wrong bolts can cause a number of problems:

• Insufficient weight support – Smaller bolts may shear or pull out under the load of your TV, causing it to crash down.
• Uneven weight distribution – Mixed bolt sizes lead to some taking more load than others, resulting in crooked hanging.
• Damage to the wall or mount – Oversized bolts can split the studs or enlarge the mount holes, compromising the installation.

In short, the proper bolt size helps evenly distribute the TV’s weight to ensure a safe and secure mounting.

TV Mounting Bolt Types

Before getting into sizes, let’s review the main types of bolts used for TV wall mounts:

Lag Bolts

The most common. They screw into wood studs with a large threaded portion to hold firmly. Provides excellent pull-out strength.

Expansion Bolts

Also called mollies. They expand inside drywall or plaster using pressure to grip tightly. Best for hollow walls.

Concrete Screws

Hardened sleeves drill into concrete to create the anchor point for the threads. Ideal for concrete or brick mounts.

Toggle Bolts

Spring-loaded wings collapse to fit through a hole then expand on the other side to grip. Used to mount to hollow drywall or plaster.

We’ll refer back to these types as we discuss ideal sizing next.

Factors for Determining Proper Bolt Size

Selecting the right bolt size depends primarily on these key factors:

TV Size and Weight

The larger and heavier the TV, the larger diameter bolts required. Bolt size charts are based on TV weight capacities.

Wall Material

Drywall, plaster, wood, brick and concrete have different recommended bolt sizes and types for maximum holding strength.

Bolt Spacing

More closely spaced bolts can get away with slightly smaller sizes, while widely spaced mounts need larger diameters.

Bolt Quality

High quality stainless steel or alloy bolts can support more weight in smaller diameters than cheap hardware bolts.

With those factors in mind, let’s look at general sizing guidelines.

Recommended Bolt Sizes by TV Size

Here are the typical bolt diameters used for various television sizes:

• 32-43″ TVs – M8 or 5/16″ bolts
• 46-55″ TVs – M8, 3/8″ or M10 bolts
• 60-65″ TVs – M10, 7/16″ or 1/2″ bolts
• 70-80″ TVs – 5/8″ lag bolts or M12 bolts
• 85″+ TVs – 5/8″ or 3/4″ lag bolts

However, you should always consult your specific TV mount’s manual for manufacturer bolt sizing recommendations based on maximum load capacity and spacing.

Now let’s look at ideal bolt sizes for different wall materials.

Best Bolt Size for Wood Studs

For mounting into wood studs, lag screws are ideal as they thread deeply into the wood for maximum holding strength. Recommended lag bolt sizes include:

• 2×4 studs – 5/16″ or 3/8″ lags
• 2×6 studs – 1/2″ lags
• Solid wood – 1/2″ to 5/8″ lags

Use the largest diameter lag bolt that will fully sink into the stud to distribute weight across the wood grain.

Best Bolt Size for Drywall or Plaster

For hollow drywall anchors, size appropriately for the TV weight:

• 32-55” TVs – M6 or 1/4″ anchors
• 60-75” TVs – M8 or 3/8” anchors
• 80-100” TVs – M10 or 1/2” anchors

Use toggle bolts for greater strength. When fastening into the underlying stud, match lag screw sizing above.

Best Bolts for Concrete or Brick

Concrete call for hardened anchors like:

• 32-43” TVs – M6 or 1/4” anchors
• 46-65” TVs – M8 or 3/8” anchors
• 70-100” TVs – M10 or 1/2” anchors

Use sleeve anchors or epoxy anchors for strongest grip in concrete or brick.

Pro Tips for TV Mounting Bolts

Here are a few extra tips from our professional TV mounting technicians:

• Tighten lag bolts so the threads fully engage but do not strip out the holes.
• Always use manufacturer recommended bolt sizes for your specific TV and mount.
• Stainless steel hardware resists corrosion and has greater shear strength.
• Reducing washers or spacers allow using larger bolts in oversized holes.
• Use lock washers, thread lockers, or double nuts to prevent loosening.

Get Professional TV Mounting in Dallas, Texas

We hope this guide gives you some best practices for selecting the right bolt sizes and types for securely mounting your television. However, improper installation can be dangerous – instead, have our fully licensed, bonded and insured TV mounting technicians handle it for you!

We Mount TV serves Dallas, Plano, Irving, Frisco, and all North Texas with expert TV wall mounting services. Contact us today for your free estimate! Our TV pros will determine the perfect mounting location, select commercial grade mounts and hardware, and securely fasten your TV using industry best practices. Your satisfaction is 100% guaranteed!

The Samsung Frame TV combines beautiful 4K QLED picture quality with a slim, minimalist design that blends seamlessly into your décor. When wall mounted properly, the Frame all but disappears – leaving just your images and art on display.

But mounting the Frame TV requires some special considerations compared to other displays. In this complete guide, we’ll walk you through the entire process step-by-step.

Why Hire a Pro for Frame TV Mounting?

While it is possible to self-install your Samsung Frame TV, we highly recommend hiring professional installers for the best results. Here’s why:

• It’s extremely heavy – The Frame ranges from 49 to 85 inches and weighs over 70 pounds even for the smallest models. Handling it safely and lifting it onto the wall mount requires experience.
• Cabling must be concealed – For a clean look, all power and AV cables need to be routed through the wall or hidden inside the mount. Pros have tools and know-how to conceal cabling cleanly.
• Precise leveling is a must – A crooked picture frame would look silly. Your mounting pro will use specialized tools to ensure the TV is perfectly level.
• Calibration for best picture – Like any TV, the Samsung Frame requires accurate calibration of the picture settings for optimal image quality. Techs use calibration test patterns and meters for precision tuning.

Simply put, our pros have the skills, tools, and experience to get your fancy new Frame TV mounted right the first time.

Step 1: Select the Right Mount

Your professional installer will select the proper wall mount based on:

• Your Frame TV’s size
• Mounting location and wall construction
• Viewing needs like swivel or tilt
• Ambient lighting conditions

For the Frame, we recommend a low-profile, wall-hugging mount to maintain the picture frame aesthetic. An articulating full motion mount also allows angle and height adjustment for ideal Frame TV positioning.

We exclusively use commercial grade mounts from brands like Sanus and Peerless rated for the weight and size of your specific Frame model. This ensures completely secure support.

Step 2: Determine Mounting Location

Next, we’ll work with you to determine the optimal wall location for your Samsung Frame mount. Considerations include:

• Ideal viewing height and distance
• Available wall space and construction
• Ambient light sources that could cause glare
• Convenient access to power outlets and AV ports

Pro installers use laser measures and levels to find stud locations and mark the exact mounting points.

Tip: Samsung includes a special no-gap wall mount with the Frame TV to preserve its slim form factor. We will ensure the location adheres to Samsung’s mounting guidelines for this proprietary mount.

Step 3: Prepare the Mounting Surface

With the mount location marked, your tech will now prepare the wall:

• Remove any pictures, décor, or mirrors from the wall area
• Use a stud finder to detect studs for secure attachment
• Mark stud center points with painters tape
• Clean the area thoroughly to maximize adhesion

Note: The Frame TV includes wall anchors, but professional installers often prefer using lag bolts screwed directly into studs for maximum strength. We will use whichever fastening method is best for your specific wall construction.

Step 4: Install the Wall Mount

Now for the actual Samsung Frame wall mount installation:

• We first attach a mounting board (usually plywood) to spread load across multiple studs
• The articulating mount is then bolted firmly into studs and the board using lag screws
• Mount arms are carefully leveled side-to-side and tilted down slightly
• Power and AV cables are routed through arms for clean concealed access

This provides an incredibly secure Samsung Frame wall mount ready for the TV installation.

Step 5: Lift & Hang the Frame TV

With the articulate mount ready, we now hoist the Frame TV into place:

• Using two installers for safety, your Frame is slowly lifted from the box
• The TV is securely attached to the articulating mount arms
• Cables are routed from the wall into the Frame’s connection panel
• The no-gap bracket is clicked into place for a flush wall fit

Tip: The Frame features a special vertical installation mode for especially large pieces of artwork or designs. We will position the TV right-side up or vertical based on your preference.

Step 6: Cable Management

No one wants a tangle of cords protruding from their sleek Frame TV. That’s why our pros take time to neatly organize and conceal cables.

• Power cords are routed inside the mount arms for clean access
• Media player and soundbar cables are bundled and organized
• Extra cabling is coiled, zip tied, and hidden from sight
• Cable covers or raceways neatly conceal any remaining cables

This leaves just a thin power cord protruding that blends into your wall.

Step 7: Frame TV Calibration

For the finishing touch, we complete a full calibration of your Samsung Frame television:

• Picture settings are professionally calibrated for ideal brightness, color, and motion
• AV devices are configured with the Frame TV
• The Art Mode gallery app is connected to your Samsung account to display your pictures
• WiFi is connected to download artwork and receive software updates
• The motion sensor is tested for automatic shutoff when not in use

You’ll now enjoy the Frame’s gorgeous QLED picture quality and stunning art visuals to their full potential.

Enjoy Your Perfectly Mounted Samsung Frame TV

That wraps up our complete step-by-step professional installation of your new Samsung Frame TV. We’ll clean up the area, haul away all packaging, and provide a lifetime warranty on our work.

For a flawless Samsung Frame mounting from experienced home technology pros, contact We Mount TV today!

Got a new flat screen TV but don’t want to drill holes in your wall to mount it? We feel you. Drilling holes and patching them later when you decide to move the TV can be a pain. But is it possible to securely mount your TV without making holes?

The short answer is yes – with the right equipment and know-how, you can mount your TV without any drilling required. Keep reading to learn all about drill-free TV mounting options.

Why Choose Drill-Free Mounting?

There are a few key reasons you may want to avoid drilling holes for your TV mount:

• Aesthetics – No holes means no patching and touch up painting later. This keeps your wall pristine.
• Preserving walls – If you’re renting or may move soon, not drilling preserves the wall for the next homeowner or tenant.
• Ease of install – Drilling accurately can be tricky. Non-drilling mounts are inherently easier to level and install.
• Versatility – Non-drilling mounts allow you to move the TV easier down the road.

For these reasons, drill-free mounting is ideal for many homes. But is it secure enough to hold your valuable TV?

Can Non-Drilled Mounts Support Big TVs?

The short answer is yes – with the right mount, drilling is not required even for large TVs.

Most non-drilling TV mounts use a weighted base or clamping mechanism to grip the wall securely. As long as you choose the right mount for your TV size, drill-free mounting is generally very secure.

For example, our expert TV mounting technicians commonly use non-drilling mounts for:

• TVs up to 50 inches weighing up to 80 pounds
• TVs up to 75 inches weighing up to 130 pounds
• TVs up to 100 inches weighing up to 180 pounds

With the right equipment, even very large flat screen TVs can be mounted securely without any drilling. The key is using a heavy duty weighted or clamping mount designed for your specific TV size.

Drill-Free TV Mounting Options

Here are three common types of secure drill-free TV mounting approaches:

1. Weighted Base TV Mounts

This type of mount uses a heavy weighted base that simply sits on your furniture or console below the TV. The base is wide and heavy enough (often over 50 pounds) to keep the whole setup stable and prevent tipping.

Weighted bases are quick and easy to install. Just place on the furniture, hang the mount, then attach your TV. However, the base does take up space below.

2. Clamping TV Mounts

For a cleaner look without a visible base, clamping mounts grip firmly onto a desk, tabletop, or other surface. Using adjustable arms and heavy duty clamps, these mounts stay fixed in place by compressing the mounting surface.

Clamping mounts are ideal for desks, kitchen islands, retail displays, and other flat surfaces. Just ensure the surface is thick and sturdy enough to support a clamping force.

3. Adhesive TV Mounts

Finally, adhesive mounts use a powerful sticky gel pad or tape to adhere directly to the wall. While not appropriate for heavy TVs, adhesive mounts are perfect for smaller screens up to 50 pounds.

The key is using the proper adhesive mount rated for your TV weight. Apply to a smooth, clean wall surface for best results. Adhesive mounts make TV mounting quick and easy in bedrooms, offices, and more.

Professional Drill-Free TV Mounting

While drill-free mounts are readily available, we always recommend having a professional handle the TV mounting. Accurate measurements, leveling, wiring concealment, and configuring articulating arms takes skill and experience.

Our licensed and insured technicians have mounted countless TVs using secure drill-free methods. We use only commercial grade mounts appropriate for your exact TV size and weight. Our experts also:

• Level all mounts for perfect TV positioning
• Conceal & organize cables for clean appearance
• Provide complete install & setup service
• Offer lifetime support on all work

For affordable, professional drill-free TV mounting throughout Texas, contact We Mount TV today. We look forward to mounting your new TV securely without any drilling or holes.

When it comes to mounting your Samsung TV, the significance of using high-quality bolts cannot be overstated. These bolts are not just functional; they play a crucial role in ensuring the safety and stability of your TV on the wall. Using subpar or incorrect bolts can lead to potential risks that may compromise your TV’s well-being.

Samsung TV Bolt Specifications

• Diameter Matters: M8 Bolts
  • Before diving into the market for TV mounting bolts, it’s essential to understand the specifications required for your Samsung TV. In most cases, Samsung TVs utilize M8 bolts, boasting an 8mm diameter. This standardized size is crucial for compatibility and a secure fit.
• Length Considerations: Thickness and Spacers
  • The length of the bolts is another critical factor. It depends on the thickness of your TV and whether you’re using spacers. Always refer to your TV’s manual to determine the recommended length or consult the manufacturer’s guidelines.

Top Recommendations for Samsung TV Mounting Bolts

1. Samsung OEM Bolts
   • When it comes to reliability, sticking with Samsung’s original equipment manufacturer (OEM) bolts is a prudent choice. These bolts are specifically designed for Samsung TVs, ensuring a perfect fit and minimizing any risk of damage.
2. Bolts from Reputable Brands
   • Brands like Echogear, Mounting Dream, and AmazonBasics offer compatible and reliable mounting bolts. Checking customer reviews for these brands can provide insights into the user experience.
3. Universal TV Mounting Bolt Kits
   • Opting for a universal bolt kit can be a versatile and cost-effective solution. These kits often include bolts of various sizes, catering to different TV models. Ensure the kit has M8 bolts with the right length for your Samsung TV.

How to Find TV Bolt Specifications

• Checking Your TV’s Manual
  • The first step in determining the right bolts is checking your TV’s manual. It provides detailed information about the required bolt diameter and length. If you can’t find the manual, visit the manufacturer’s website for online resources.
• Online Resources: Samsung Website
  • Samsung’s official website is a valuable resource for finding specifications. Navigate to the support section and enter your TV’s model number to access detailed information about the recommended mounting bolts.

Installation Tips for Samsung TV Bolts

• Ensuring a Secure Fit
  • Tighten the bolts securely, but avoid over-tightening, as it may damage your TV. Use a torque wrench if possible to achieve the optimal tightness without exerting excessive force.
• Using Spacers Effectively
  • If your TV requires spacers, make sure to use them according to the manufacturer’s instructions. Spacers play a crucial role in maintaining the correct distance between the TV and the wall.

Customer Reviews and Experiences

• The Power of User Feedback
  • Before making a final decision, delve into customer reviews. Real-world experiences shared by other users can provide valuable insights into the performance and reliability of specific mounting bolts.
• Learning from Others’ Mistakes
  • Pay attention to negative reviews that highlight issues with compatibility or quality. Learning from others’ mistakes can help you avoid potential pitfalls in your own TV mounting journey.

Common Mistakes to Avoid

• Using Incorrect Bolt Diameter
  • Using bolts with the wrong diameter can lead to an insecure fit and potential damage to your TV. Always double-check the specifications before making a purchase.
• Overlooking Bolt Length
  • Neglecting the recommended bolt length can result in inadequate support for your TV. Ensure that the bolts are long enough to pass through the mounting bracket and spacers if required.

DIY vs. Professional Installation

• Advantages of DIY
  • DIY installation can be a rewarding experience, allowing you to customize the setup to your liking. It’s cost-effective and gives you a sense of accomplishment.
• When to Seek Professional Help
  • If you’re unsure about the installation process or lack the necessary tools, it’s wise to seek professional help. A skilled installer can ensure a safe and secure mounting.

Ensuring Safety: Why Bolts Matter

• Protecting Your Investment
  • Your Samsung TV is a significant investment, and ensuring its safety is paramount. High-quality bolts provide the foundation for a secure and stable wall mount.
• Mitigating the Risk of Accidents
  • Accidents can happen if the TV is not securely mounted. Choosing the right bolts minimizes the risk of your TV unexpectedly detaching from the wall, preventing potential injuries or damage.

Cost Considerations: OEM vs. Aftermarket Bolts

• Weighing the Pros and Cons
  • Consider the pros and cons of using OEM bolts versus aftermarket options. While OEM bolts ensure compatibility, aftermarket bolts may offer cost savings. Strike a balance based on your priorities and budget.
• Finding a Balance
  • It’s possible to find high-quality aftermarket bolts that balance cost-effectiveness with reliability. Research thoroughly, read reviews, and choose bolts from reputable brands to ensure a satisfactory purchase.

The Aesthetics of Bolt Selection

• Blending with TV Design
  • While the functional aspect is crucial, aesthetics also play a role. Choose bolts that complement your TV’s design and minimize visibility for a clean and stylish appearance.
• Minimizing Visibility
  • Opt for bolts with a sleek design and finish. This not only enhances the overall look but also reduces the visual impact of the bolts, letting your TV take center stage.

Warranty Implications

• How Bolts Affect Your TV Warranty
  • Using non-approved bolts may void your TV warranty. Ensure that the chosen bolts comply with the manufacturer’s specifications to safeguard your warranty coverage.
• Seeking Manufacturer Approval
  • If you have doubts about using specific bolts, reach out to the manufacturer for guidance. Seeking approval ensures that you adhere to the recommended specifications without compromising warranty coverage.

Environmental Impact

• Sustainable Bolt Options
  • Consider the environmental impact of your bolt choice. Opt for bolts made from sustainable materials and explore recycling options for old bolts to minimize ecological consequences.
• Responsible Disposal
  • When replacing bolts, dispose of the old ones responsibly. Check with local recycling facilities for proper disposal methods to contribute to environmental sustainability.

Innovations in TV Mounting Bolts

• Emerging Technologies
  • Stay informed about emerging technologies in TV mounting bolts. Innovations such as smart bolts with built-in sensors may become available, enhancing the overall safety and functionality of your TV mount.
• Future-Proofing Your Installation
  • Choose bolts that align with future developments in TV technology. Future-proofing your installation ensures that you won’t need to replace bolts when upgrading to a new TV model.

Conclusion: Making an Informed Choice

In conclusion, selecting the best Samsung TV mounting bolts is a crucial step in ensuring a safe, secure, and visually appealing installation. By understanding the specifications, exploring reputable options, and considering various factors like aesthetics and environmental impact, you can make an informed choice that enhances your overall home entertainment experience.

FAQs:

1. Q1: Can I use any bolts to mount my Samsung TV?
   • A1: It’s recommended to use bolts specified by Samsung or reputable brands. This ensures a secure fit and minimizes the risk of damage.
2. Q2: Where can I find the specifications for my TV’s mounting bolts?
   • A2: Refer to your TV’s manual or visit the official Samsung website. The manual will provide detailed information about the required bolt diameter and length.
3. Q3: Can I use longer bolts than recommended for my TV?
   • A3: It’s not advisable, as longer bolts may damage the internal components of your TV. Stick to the recommended specifications for a safe installation.
4. Q4: Are universal mounting bolt kits a good option for Samsung TVs?
   • A4: Yes, if the kit includes bolts with the correct diameter and length for your TV. Ensure the kit is from a reputable brand to guarantee quality.
5. Q5: What should I do if I’ve already mounted my TV with the wrong bolts?
   • A5: If you suspect the bolts are incorrect, dismount the TV immediately and replace them with the recommended specifications. Continuing to use the wrong bolts can pose a risk to your TV and safety.

Choosing the proper mounting screws is essential to securely fasten your Samsung TV onto a wall mount bracket. Using unsuitable screws that don’t match Samsung’s back panel holes risks a loose connection that endangers your TV.

This guide covers everything needed to select the right Samsung TV mounting screws and install them correctly for a safe, seamless mounting project.

Common Samsung TV Mounting Screw Sizes

Most standard Samsung television models from 32″ to 70″ use M8 sized mounting screws. Smaller models may use M6 screws while larger TVs sometimes require M10 sized screws.

Always physically examine the mounting screw holes on the back of your Samsung TV model to identify the diameter rather than guessing based on TV size alone. Referencing your user manual is also recommended.

Machine Screws vs Lag Bolts for Samsung TV Installation

For mounting a Samsung TV, you generally have a choice between:

• Machine screws – With coarse threads and flat underside. Common options are M4, M6, M8 and M10 machine screws.
• Lag bolts – Thicker, wood-gripping threads with pointed tip. Typical sizes used are M8 and M10.

Machine screws provide more gripping power for plastic TV panels compared to lag bolts. Measure your Samsung screw holes to determine the matching machine screw size needed.

Correct Length for Samsung TV Mounting Screws

The proper length for your Samsung TV mounting screws depends on:

• The thickness of your TV’s back panel
• The depth of the wall mount bracket
• Any spacers used between the TV and bracket

Ideally screws should fully engage the bracket while still protruding enough to grab the panel. For most Samsung TV mounts, 1.5″ to 3″ screw lengths are appropriate.

Using Washers and Spacers for Samsung TV Installation

Washers help distribute clamping force and prevent damage to the plastic backing. Spacers fill any gaps between the TV and mount. Recommended setup:

• Flat washers directly against the TV panel
• Lock washers prevent loosening of the screw
• Rubber washers can also buffer panel contact
• Nylon spacers take up any empty space behind panel

This ensures an evenly secured, wobble-free Samsung TV installation.

Tightening Samsung Mounting Screws

Use hand tools to carefully tighten mounting screws in a crossing “X” pattern when installing your Samsung TV. Follow these best practices:

• Tighten screws gradually a few turns each initially
• Alternate between screws on each side rather than one side fully
• Stop tightening when resistance increases to avoid stripping plastic
• Retighten all screws after 1-2 days allowing for settling

Avoid power drills/drivers to prevent over-torquing your Samsung TV’s mounting holes. Controlled manual tightening gives peace of mind.

FAQs About Samsung TV Mounting Screws

Here are answers to some frequently asked questions about selecting and installing Samsung TV mounting screws correctly:

What screws come with Samsung’s wall mounts?

The included screws are often M8 sized but verify based on your individual TV model.

Should I use the screws in the box or buy new ones?

Using brand new quality screws helps ensure best grip, but Samsung’s screws will also suffice in most cases.

How can I determine my Samsung TV’s screw size?

Physically measuring the mounting hole diameter on the back panel is the most accurate way to identify the screw size needed.

Can I use standard drywall screws?

Machine screws or lag bolts specially designed for TV mounting provide much more grip and stability.

What screws work with metal studs?

Self-tapping machine screws with built-in washers are ideal for mounting Samsung TVs onto metal studs.

Summary

Choosing high-quality mounting screws specifically matched to your Samsung TV model’s back panel ensures a secure installation. Follow the size, type, length, accessories and tightening tips covered in this guide for optimal safety. Always physically check Samsung hole diameters and widths before selecting your mounting hardware. Taking care to install screws properly allows enjoying your new Samsung TV with peace of mind that it is firmly mounted.